Hubs

High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm thru axle - 78 x 15mm version: flush axle, no end caps

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

• Machined and forged alloy construction • Sealed cartridge bearings • Lightweight design • 8/11-speed Shimano/SRAM cassette compatibility • 20, 24, 28, 32, 36-hole spoke drilling • Quick release • 130mm hub spacing • Black or silver

- 15 x 100mm thru-axle endcaps for Spin Doctor 6F (front)hub - 20 x 110mm thru-axle endcaps for Spin Doctor 6F (front hub - Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs

Reliable, simple, and e-bike specific hub. To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet machined out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

- Produced by one of Japan's oldest hub makers - Silky smooth Japanese sealed cartridge bearings - High polished finish - Choose fixed/free or fixed/fixed flip-flop rear hub - Hub spacing: 120mm OLD

Product specs: - Front hub features - 7075 t6 alloy axle - Qr or 15mm axle type - Japanese cartridge bearings - 28,32 hole count - 205g - Rear hub features - 7075 t6 alloy axle - Qr or 12x142mm axle type - Four sealed cartridge bearings - 28,32 hole count - 325g

- Kick-shift 2-speed hub - Coaster brake - Benefits include its simple backpedal-action shifting/braking and no cables or shifters - 6061 aluminum hub shell with 13/32" slotted solid axle (162mm overall axle length) - Gear ratio range of 138% - Includes 22 tooth 3-spline cog - 116mm OLD (over-locknut dimension)

- Internal gear 3-speed hub with HG-splined 8-10sp freehub body for use with any IS 6-bolt disc brake - 6061 aluminum hub shell with 13/32" slotted solid axle (179mm overall axle length) - Gear ratio range of 177% (33% each step) - Cassette and shifters sold separately. Special shifter setup required: internal 3sp is shifted via a standard mountain 3sp front derailleur shifter. Sturmey Archer shifters not compatible with this hub

- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately

- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length) - Choose 70mm or 90mm drum brake front hub (brake lever sold separately)

- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately

- Threaded for singlespeed freewheel, includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately

- Use a front/reat set or match the front with Sturmey 3sp fixed rear or 2sp kickback rear - 6061 aluminum shell with sealed cartridge bearing and solid nutted axle (145mm front/175mm rear overall axle length) - Rear is flip-flop threaded for freewheel

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance