Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$7.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

$29.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).

$18.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains
- DLC Coated
- Non-reusable
- Opening Tool Required
- Card of 2 pairs

$14.99
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece comes in a version for headsets with standard spacers and another that's Interlok-compatible for Cane Creek headsets.

$16.99
Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.

$59.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake.
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- No additional hardware needed
ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$140.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price.
Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market.
Features
- Fit, security, and adjustability
- Above-bar or below-bar mounting system
- Compatible with most extensions

$6.25
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

$4.99
Expandable 3mm hex bolt mounting plugs
Keep your handlebar tape in place with these expandable bar end plugs to give a safe and protective finish for your bars.
- Designed to fit standard diameter handlebars with an inner diameter of 18-25mm
- Clean and protective finish for road and mountain bike handlebars
- Easy to install with included 3mm hex wrench
- Weight: 20 grams

$95.00
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 4 N/mm (23 lbs./in).
- Fits Ohlins TTX shock absorber for Stumpjumper FSR only.
- Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.

$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x8 socket head screw included

$10.99 - $99.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum.
- 5G Tube Tops snap on at any time.

$14.99
The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It comes in a Right and Left version and is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.

$19.99
The Problem Solvers Universal Derailleur Hanger is a handy thing to keep on hand (and even bring on epic off-road rides or extended tours) because it makes it relatively easy to fix a damaged/bent derailleur hanger, which is a pretty common breakdown. This CNC-machined 6061-aluminum hanger takes the place of the drive-side quick-release nut providing a straight hanger to mount your derailleur to. You'll still be able to shift into many of your gears, too.

$7.19
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 37.5mm
- Length: 124.5mm
- Overall: 145.5mm

$25.99
Compatible with Profile Design's T+ carbon, T+ aluminum, and ZBS aerobars. Make sure your fit is totally dialed with the appropriate rise for your aerobars.

$90.00
- Machined aluminum tensioner bolts on to derailleur hanger
- Adjustable spring tension and dual floating pulley
- For frames with vertical dropouts
- Fits hubs with 22-28Mm chainline (From inside of dropout)
- Made in USA

$50.00
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt

$3.99 - $24.99
- 6061 Forged Alloy
- Made to O.E.M. specifications
- Correct hardness to reduce damage to frame upon impact

$12.00
The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Laser Carbon Star Plugz are the perfect touch for the perfect cockpit.
- Aluminum laser-etched carbon bar plugs
- 3mm screw & expand
- Laser-etched
- Patented lock tight crown design (plugs never fall out)
Page 1 of 31
Next page