Other

- Adjustable direct rear mount kickstand - Mounts to 18-40mm kickstand tab - Fully adjustable length for 26" to 29" wheels - Self locking design - Alloy construction

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

• Rear mount • Fits 26" wheels

• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c

- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform

• Aluminum double kickstand • Includes top plate • Not adjustable • 26-inch bicycle compatible

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

Aluminum Direct Mount kickstands in KSA 18mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 18 has two bolt holes 18mm apart. - 320mm long (Trim to optimize fit) - Black or Silver - Bolts included KSA 18 fits many Giant and Liv models: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)

Aluminum Direct Mount kickstands in KSA 40mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 40 has two bolt holes 40mm apart. This particular KSA 40 design mounts inboard of the chainstay, not outboard.

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

Cannondale Headshok Adaptor for the SKS Shockboard Fender

Fork Adapter for Suntour/RockShox Offset allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Fork Adapter for Suntour/RockShox Straight allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement. - Made in Germany - 11890 Nuts and bolts are black finish - 11891 Nuts and bolts are silver finish

For mounting the wheel guard in the steerer tube The cone system from SKS GERMANY has proven itself for over 20 years. After an update, the SKS SHOCKBLADE and SHOCKBOARD mudguards can now also be securely attached to larger fork shafts. The system covers a diameter of up to 39 mm (1.8 inches) and is made of very robust, glass-fiber-reinforced plastic. In addition to the simple assembly, the new cone system convinces with well thought out fastening components for an optimal fit.

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

Stay Kit for Bluemels STYLE Fenders includes 4 black powder-coated U-Stays + ESC V-Adapter Strut Mount Set (11892). Made in Germany. 11905-Set for Bluemels STYLE 46mm Width Profile (item 11832) 11909-Set for Bluemels STYLE 56mm Width Profile (item 11835) 11913-Set for Bluemels STYLE 65mm Width Profile (item 11838) 11915-Set for Bluemels STYLE 75mm Width Profile (item 11841)

Stay Kit for Bluemels 26"/28" Fenders includes 4 V-Stays with ASR Safety Release for Front + Eyebolt and Nut Set. Made in Germany. 11897-Set for Bluemels 26"/28" with Black Stays & Hardware (for 11805, 11806, 11807, 11811, 11815, 11819 and 11823) 11898-Set for Bluemels 26"/28" with Silver Stays & Hardware (for 11808, 11812, 11816, 11820 and 11824)

- Protects high risk areas of the fork from rock chips, wear & scratches - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - Fork coverage ~60%. Includes crowns, lowers, and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Protects high risk areas from rock chips, wear & scratches - Designed around road and gravel bike geometry - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed