Rims

Overkill? Maybe. Let’s just call it a rim you can ride over hill and dale without bothering to pack a spoke wrench. Product specs: - Sizes: 700c, 29-inch, 20-inch, 20x1 3/8-inch, 24-inch, 24x1-3/8-inch - Hole counts: 32, 36 - Width: 22.5mm

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

- 21.6mm wide Sleeved rim

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Product specs: - Size:24", 26", 29" - Width:33.5 - Bead width: 33.5mm - Inner bead width: 26mm - Section height: 25.5mm - Weight (26"): 660g - Sleeved or welded - Hole count: 32, 36

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

- Carbon rims available in two different profile heights featuring improved brake tracks - Toray T700 carbon in both Unidirectional and 3k carbon weaves for strength and integrity - Tubeless compatible rim bed with an 18mm internal width supports wider modern road tires Specs: - ISO: 622 - Width ID: 18 - Width OD: 25 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 470g - ERD: 569

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applications - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 584 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Profile: 29 - Width ID: 27 - Width OD: 32 - Weight: 410g - ERD: 541 Downhill: - Width ID: 32 - Width OD: 37 - Profile: 31 - Weight: 450g - ERD: 545 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 370g - ERD: 550

HED Belgium G alloy rims make any custom wheel build that much sweeter. With 30mm external and 25mm internal widths, you can add tire volume, smoothness, and rolling speed to any bike or hub set. All Belgium rims feature a welded rim joint, and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer. 700c - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 24, 28, 32 - Color: Black - Brake Track: N/A - Wheel Size: 700c - Weight: 453 grams - Max Pressure: 80psi - ERD: 592mm 650B - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 28 and 32 - Color: Black - Brake Track: N/A - Wheel Size: 650b - Weight: 426 grams - Max Pressure: 80psi - ERD: 555mm

- The next generation in SPANK’s mountain bike rims with a built in vibration damping system. - Low sectional profile height and high width adds radial compliance while keeping high lateral stiffness and torsional strength. Features - Radially Compliant Gravity Rim with Vibrocore - Oohbah Inverted Inner Wall, BeadBite anti-burp - Optimized for DH, FR, and Heavy Enduro - Tubeless Ready

- Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

Whether it’s 'cross, road, or mountain, nothing makes your bike feel faster than a good set of wheels. The Whisky No.9 carbon rims are performance-driven designs that offer excellent durability and features to create a torsionally stiffer rim, compared to single wall carbon offerings. Available in multiple sizes and widths, Whisky’s rims have you covered no matter what or where you ride. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

Whisky's No.9 30d road rims are designed to offer leading edge, tubeless performance on or off-road. These rims offer lightweight, stable platforms to build exquisite wheels. Its wide internal width pairs exceedingly well with a broad range of tires and provides versatility no matter what surface you’re riding. These disc brake-specific rims offer clean design and aesthetics. From tarmac to gravel, brevets to the CX course, this rim is Whisky's lightweight go-to for all round, drop bar performance. As with all rims they make, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

The No.9 Carbon GVL rim’s low rotational weight and the aerodynamic benefits of its 35mm-deep rim profile help you conserve energy over miles of rollers, false flats, and whatever else your gravel rides throw at you. The 23mm internal width pairs well with tires ranging from 32mm to 2.2-inches wide for versatility in unpredictable conditions. The asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer builds, making the No.9 Carbon GVL a solid foundation for wheels that will take your gravel bike to the next level. - Recommended rider weight limit is 240 lbs. - 85 PSI maximum tire pressure on a 32c tire - Weight: 435g - For tires 32mm – 2.2-inches

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applicarions - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 622 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Width ID: 27 - Width OD: 32 - Profile: 29 - Weight: 440g - ERD: 578 Downhill: - Width ID: 32 - Width OD: 38 - Profile: 31 - Weight: 500 - ERD: 584 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 390g - ERD: 587

The Box One Rims feature a double-walled, eyeleted, low profile designed and optimized to be lightweight and durable! Offered in both brake and brake-less variants, allows for clean and sleek wheel builds that only have rim brake tracks where they need to be. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-Less variants do not have a brake track and are not designed to be used with rim brakes! These variants can be used as front rims or rear rims with a disc brake ONLY! COMPATIBILITY - Box One X2 Pro Carbon 1 1/8" cro-mo steerer 20" X 20mm fork - Box One Quantum Hubset 36h - Box Two 20mm Front Hub 36h - Box Two 20mm Freewheel Hubset 36h - Box Three Pro 10mm Rear Disc Hub 36h

The Box One Rims feature a double-walled, eyeleted, low-profile design optimized to be both lightweight and durable! We offer these in both brake and brake-less variants. You’ll have a clean and sleek wheel build with rim brake tracks as needed. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-less variants do not have a brake track and therefore are not designed to be used with rim brakes! They are to be used as front or rear rims with disc brakes ONLY! COMPATIBILITY - Box One XS Mini Carbon 1" alloy steerer 20" x 10mm fork - Box One Harmonic Expert Hubset 28h - Box Three Expert Hubset 10mm 28h - Box One Stealth Expert 10mm Front Hub 28h - Box One Stealth Expert 10mm Rear Hub 28h

Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction deliver width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheelset is a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. The Sentry MK3 proves wider can mean faster. - More stable 32mm internal width for tires up to 3.0" - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger - Patented BST design for easiest and most reliable tubeless - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires

- Mid Fat, and Fat Race are what this thing is all about - Perfect for sand, snow, trail, and everything in between - Double wall for increased stiffness and tubeless ready - 45mm width disc-only rim

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • Width: 65mm • Depth: 21mm

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead

Our flagship CZR carbon rims deliver minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. Reinforced spoke holes, TCS 2.0 technology, an asymmetrical design, and two years of development make them the most dependable carbon rims on the market. CZR rims set themselves apart from the pack by providing unbeatable strength and ride quality at a more affordable price. Available in i23 and i30 inner widths to satisfy the needs of both gravel and mountain riders. FEATURES: - Reinforced spoke beds, proven 4D angled spoke hole drilling, and an asymmetrical design…all the necessary ingredients of an incredibly durable rim. - Two internal width options… 23mm for the gravel-centric and 30mm for the mountain-focused. - When compared to the competition, lab tests proved our CZR carbon rims to be lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. To be precise, our CZR i23 rims were 38% more impact resistant than their direct competition while our CZR i30 rims were 10% more impact resistant. USAGE: Adventure Road / Gravel / Cross-Country / Trail / Enduro

- A high performance alloy rim designed for freeride, race and downhill use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable

Control and stability for enduro riding. - Rims sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • ERD: 534 • Width: 80mm • Depth: 24.5 • Weight: 1,310 grams (32-hole), 1,294 grams (36-hole)

- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 has been redesigned to take full advantage of the benefits carbon fiber has to offer, and feature a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub, and you’ve got a world-class wheelset ready for action.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

PRODUCT SPECS: - Size: 26?, 27.5" (sleeved only) , 29? - Outside Width: 25mm - Inner bead width: 20.3mm - Section Height: 19mm - Weight: 26?- 448g, 27.5"-495g, 29?- 527g - Type: Sleeved or Welded - Brake Compatibility: Disc Only - Hole Count: 28, 32

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

Product specs: - Str tubeless ready - Size: 27.5", 29" - Outside width: 40mm - Inner bead width: 36mm - Weight: 27.5"-515g, 29"-550g - Double wall welded rim (sleeved rims available oem only) - Brake compatibility: disc only - Hole count: 28/32

- Specifically designed for XC and all-mountain use - Shorter and thicker sidewalls for incredible durability even when paired with low pressure, tubeless tires - Bead hook maximizes 30mm internal width for optimum tire performance

- Specifically designed for XC and all-mountain use - Shorter and thicker sidewalls for incredible durability even when paired with low pressure, tubeless tires - Bead hook maximizes 30mm internal width for optimum tire performance

The SPANK Flare 24 Vibrocore Rim is a disc-specific, tubeless-ready clincher rim, optimized for Gravel, Adventure, and MTB Cross Country use. SPANK's radial-compliant, disc-specific rim utilizes a proprietary Vibrocore inner well that reduces the transmission of harmful vibration frequencies, resulting in improved rider comfort as well as increasing the fatigue life of the rim. Paired with our Vibrocore handlebars, whether you're on risers or drops, long rides are about to get more comfortable. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhances Radial Compliance, improving traction while reducing negative feedback to the rider - Symmetric profile with wide 24mm inner width, optimizes tire spread with modern wide gravel tires, without compromising overall weight - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB DH - ISO: 622 - Width ID: 30 - Width OD: 35 - Profile: 21.5 - Wall: Double - Side: Disc - Drill: 32 - Valve: Presta - Weight: 550g - ERD: 594.4

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB XC - ISO: 622 - Width ID: 25 - Width OD: 29.8 - Profile: 21.5 - Wall: Double - Side: Disc - Drill: 32 - Valve: Presta - Weight: 485g - ERD: 594.4

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - Size: 29" - Model: Bolt Alloy MTB AM - ISO: 622 - Width ID: 27 - Width OD: 31.8 - Profile: 21.5 - Wall: Double - Side: Disc - Color: Black - Drill: 32 - Valve: Presta - Weight: 530g - ERD: 594.4

Lighter format / all mountain / trail riding The PHASE30 mirrors Chromag's BA30 profile but in a lighter format that suits all-mountain and trail riding conditions. This is a high-quality alloy rim that is tougher than most with added protection at the bead-walls for impact resistance and reduced sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The PHASE30 is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Chromag's fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split at the seam if you have an impact there. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - ERD: 566mm - Tire sold separately

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Thus far, our Big Deal fat rims and wheels have won the hearts of cyclists around the world. What if that's not enough for you? What if we told you that we now have an even BIGGER deal than before? Enter: The Big Half Deal (B.H.D.). This is a special, larger diameter version of our beloved 85mm-wide carbon Big Deal rim. With a 27.5-inch size, it's smack-dab-HALF-way between a 26" wheel and a 29" wheel. If you have a new-fangled 27.5" fat bike, this is THE performance rim choice. Like other Big Deals, the B.H.D. is tubeless ready with our patented Inflatobam technology. Tech Notes 1. Do NOT use tire levers on B.H.D. rims! 2. Specific to our Big Deal line of carbon rims: If you choose to ride these rims on regular dirt trails (e.g. NOT in soft snow or sand), wider tires and higher air pressure will decrease the chance of rim damage from striking an obstacle. We strongly recommend an honest assessment of your ride style. For the BHD, use 8psi minimum on groomed snow, or 10psi minimum on dirt and rocks - both with a minimum tire size of 3.8". Additional Info - Rim Width: 85mm - Rim Material: Carbon - Rim Weight: 465 grams - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 589 (includes washer)

Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension

• Size: 26x4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 80mm • Depth: 24.5 • Weight: 1,061 grams

The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond. - Aluminum welded construction, hooked tubeless design - PHR – Pro Head Reinforcement system increases the load-bearing surface of the nipples on the rim and reduces localized stresses - Provides a 17% increase in pinch flat resistance compared to the previous FR 560 rim - Disc brake only

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

Modern welded XC rim, developed with a 25mm inner width. Modern-day XC rim: The right width to run wide tires necessary to be competitive on today's demanding Cross Country courses. The welded construction of the XR 391 and the bead-blasted, anodized finish are on par with your high-end XC ride. The use-specific profile, the custom alloy, and the use of the PHR nipple interface allow you to pair the unpairable: Wide, strong, and light.

This rim can take heavy loads and cope with demanding surfaces at the same time! Are you searching for a pair of rims to ride off the beaten path? If so, the RR481 may be the perfect option for you. With an inner width of 22mm and approved up to a 130kg system weight, this extremely durable rim is made for rough, off-road rides. Whether you mount them on your Cyclocross bike, your gravel racer, or for your next bike-packing trip, the RR 481 won't let you down.

Sleeved 25 mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

An unexpected rough section on your ride? No problem with this rim. Looking for a bomb-proof rim to build up your Gravel, Cyclocross, or adventure bike? Then it's definitely worth taking a look at the RR 521 rim. 32mm deep and 20mm wide, this modern road rim could have been classified as a Cross Country rim just a few years ago. Nowadays it's just a great offer to widen your ride... with drop bars.

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup